ANATOL Stretch Pro Fabric Stretcher

Stretch-Pro is a professional solution for the perfect stretching of screens to an even, high tension. The gentle rubber grippers work well with virtually all fabric and frame types.

A series of powerful pneumatic clamps allows precise tensioning in both warp and weft directions to achieve optimum printing results. It is modularly expandable for expansion of size capability.

Sefar Stretching Clamps

Sefar stretching clamps are constructed with our precision mesh in mind. It all adds up to a winning combination for optimal, efficient stencil-making.

E-TKO-SST-150A      150mm (5.9") Pneumatic Clamp
E-TKO-SST-250A      250mm (9.84") Pneumatic Clamp
E-TKO-SST-A120      SST Dual Circuit Control Manifold

Grunig G-STRETCH 210 Mechanical Stretching Machine

* Maximum frame format of 3000 x 3000 mm/118 x 118 inch
* Instant adjustment of the machine size
* Optimum handling and highest precision
* Automatic pre-bowing of the screen frames
* Locking function for pre-bowing of screen frames
* No contact between frame and mesh during stretching process
* A supporting board allows to stretch many frames at the same time
* DUPLEX clamps sliding in V2A guideway

Diamond Chase Adjustable Fabric Stretcher

Diamond Chase Tension-Quik™
The Tension-Quik™ is a low cost, easy-to-use screen stretching system. Combined with stretch and glue frames, the Tension-Quik™, as an adjustable or welded stretcher, is the least expensive route to high tension levels. As a frame, it provides a fast screen making system. One tool -- one motion.

TensionQuikWholegLocking System: The locking systems commonly used with the Tension-Quik™ are the Top Loading™ and Keystone™ Nylon. The Top Loading™ system uses two round rods which are snapped into the roller with the assistance of a wheel type insertion tool. This locking system allows for the fabric to be secured simply and evenly. The round nylon rods come in three color coded diameters to accommodate all mesh counts.

The Keystone™ Nylon system utilizes a single tapered nylon rod which slides into the roller through the end of the frame channel. This system is recommended for wire mesh and for very large stretchers because of its pre-tensioning ability.

The Tension-Quik™ is primarily manufactured as an adjustable screen stretcher for glue-on frames. Four independent channels link together allowing the unit to move in and out, adjusting the size in both directions. The channels enclose a tensioning roller that ratchets in a clockwise rotation to tension the mesh. Each roller has a fabric locking system to easily and securely capture the mesh. The Top Loading™ locking system or the Keystone™ Locking system are available in the Tension-Quik™.

The welded stretcher operates in the same manner as the adjustable unit, only the frame channels are welded to one specific size. This model is recommended only when one frame size is being used or if the unit will be secured to a table.

The Tension-Quik™ can also be manufactured as a printing frame. As a frame, the corners of the frame are mitered and fully-welded. Guaranteed watertight.

Features:
* Manually operated - air compressor not required
* Adjustable for different screen sizes
* High tension capabilities
* Easily stored when not in use

Standard Stretcher Size:
E-TQ-2525     Tension-Quik™ 25"x25" Adjustable Stretcher.

Accesories:
E-TQ-0005    Tension-Quik™ Allen Wrench
E-TQ-2525     Tension-Quik™ Pizza Roller Insertion Tool