Features
• 2 part system
• Air or bake
• Excellent opacity
• Excellent screenability

Colors
PP-91-502 Super White
PP-91-505 Primrose Yellow
PP-91-510 Medium Yellow
PP-91-515 Yellow Gold
PP-91-520 Orange
PP-91-585 Bright Green
PP-91-590 Deep Green
PP-91-570 Deep Blue
PP-91-475 Peacock Blue
PP-91-530 Fire Red
PP-91-535 American Red
PP-91-540 Deep Red
PP-91-555 Purple
PP-91-595 Brown
PP-91-592 Opaque Black

Transparent Colors
PP-91-500 Yellow
PP-91-580 Green
PP-91-560 Process Blue
PP-91-565 Reflex Blue
PP-91-525 Warm Red
PP-91-545 Rubine
PP-91-550 Rhodamine

Fluorescent Colors
PP-91-600 Flourescent Pink
PP-91-601 Flourescent Cerise
PP-91-602 Flourescent Flame Red
PP-91-603 Flourescent Orange
PP-91-604 Flour. Gold Yellow
PP-91-605 Flourescent Yellow
PP-91-606 Flourescent Blue
PP-91-607 Flourescent Green
PP-91-608 Flourescent Magenta
PP-91-609 Flour. Red Orange
PP-91-610 Flourescent Violet

Modifiers
PP-91-815 Metallic Base
PP-91-825 Clear Extender
PP-91-820 Halftone Base
PT-83 Flattening Powder
PP-91-999 Catalyst
PP-91-999A Metallic Catalyst

Packaging:
Inks and Solvents in quarts and gallons and 5 gallon containers.
*Contains lead or chromate pigments.

Color FX Series PP-91

EPOXY AIR-DRYING INK
Two part air-dry system

PP-91 Ink Series is a 2-part epoxy ink system. Once these inks are air dried (or baked) a high gloss, opaque finish results. All PP-91 Series inks have excellent flexibility and adhere to a wide range of products. Outstanding solvent, chemical and abrasion resistance is assured with this high quality epoxy ink line.

SPECIFICATIONS
USES: For use on metals, ceramic tiles, glass, phenolics, rigid plastics, and polyethylene.

FINISH: Dries to a high gloss finish.

OPACITY: Excellent opacity; transparent colors are also available.

COVERAGE: Averages about 1,000 sq. ft. per gallon.

DRYING TIME: Approximately 30 to 60 minutes at room temperature. This series can be forced dried 3 to 5 minutes at a minimum of 150° to 180° F. For best chemical resistance bake for 7 minutes at 350° to 370°

MIXING INSTRUCTIONS: PP-91-999 Catalyst is required with PP-91 Series ink and must be ordered separately. An 8 oz. container of catalyst is normally used with a quart of ink, and a quart container of catalyst is normally used with a gallon of ink. Add 1 part Catalyst to 4 parts ink. Catalyst pot life is normally 4-6 hours; shorter at elevated temperature. Baking will produce hard, unscratchable prints. For Metallic colors use PP-91-999A Curing Agent

SCREEN FABRIC: Use a 200-305 monofilament fabric.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut and photo screens and blockouts with this ink.

MODIFIERS: Use SYS-1976 for fast thinner or PP-91-805 for reduction. To extend add PP-91-825. To subdue the gloss finish mix PT-83 Flattening Powder.RETARDER: Under hot and dry conditions, use T-980 or PP-91-810.

ADHESION: Excellent on most substrates.

WASHUP: Use SYS-1925 Washup or biodegradable washes 2500 or 2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION