USES: For use on most types of paper, card, wood, sealed particle board, metal (properly primed for the intended use), glass, treated polyethylene and polypropylene, reflective sheeting, and some pressure sensitive materials.
FINISH: Dries to a durable, high gloss finish.
OPACITY: Excellent opacity for most colors.
COVERAGE: Averages about 1,300 sq. ft. per gallon.
DRYING TIME: GLE Series dries by oxidation in approximately 1-1/2 to 4 hours for second coat application or "overnight" before final stacking. Prints may be force dried for 15-20 minutes in an oven, provided the temperature does not exceed 250°F To speed drying time under adverse humid or cold conditions. add approximately 40-50 grams of GLE-1880 accelerator to a gallon of ink.
SCREEN FABRIC: Use a 156 mesh to achieve greatest opacity. Higher mesh counts to 280 can be used for finer detail when necessary.
SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, and all knife-cut stencils are suitable.
MODIFIERS: Thin with GLE-1800 Thinner. GLE-1700 can be used to increase transparency; however, this will reduce the duarbilility and lightfastness of the color. A small amount of GLE-1730 will increase print quality.
ADHESION: Excellent on most recommended substrates.
WASHUP: Use GLE-1840, SYS-1900 or biodegradable washes 2500 or 2510 screen wash g
ALWAYS TEST PRINT BEFORE PRODUCTION!
| Qty | Break |
|---|---|
| 0 | $ 1122.20 |
| 1 | $ 1066.09 |
| 2 | $ 1009.98 |
| 3 | $ 953.87 |
| 4 | $ 897.76 |
| Qty | Break |
|---|---|
| 1 | $ 224.44 |
| 4 | $ 213.22 |
| 8 | $ 202.00 |
| 12 | $ 190.77 |
| 20 | $ 179.55 |
