Bright Silver

SPECIFICATIONS:

USES: Coated paper stock: where gloss, flexibility and die-cuttability are desirable. CPI Halftone Base and Toners are recommended for 4-color process work on posters and POS. Works well on foam board materials with clay coated paper liners.

FINISH: Dries to a gloss Water Slide Decals: SS is the ink of choice for this resurging medium. Other recommended substrates: banner materials such as Tyvek, leather, wood and metals. Also used for hand-painting inflatables.

FINISH: Cures to a gloss finish.

COVERAGE: Averages about 1,200 sq. ft. per gallon.

40 minutes, or 10 to 50 seconds on a jet dryer at 150°F

OPACITY: Opaque and transparent colors are offered in this specialized series. The user can mix all colors to obtain desired color depth and opacity.

counts can be used for finer detail when necessary.

DRYING TIME: SS Lacquers dry through solvent evaporation. Fresh air volume is more of a factor in dry time then temperature. Force Dry: for high volume air dryer (3000-5000CFM, equipped with air knifes) at 100-120°F: 30-60 seconds. Air Dry: 15-45 minutes depending on air circulation and temperature.

indirect photostencils, or water soluble, knife-cut

SCREEN FABRIC: Use a 160-305 monofilament fabric.

FLOW AGENT: GLL-1870.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

Slow Thinner GLL-1820.

MODIFIERS: Use T-804 Lacquer Thinner or CM-9840 Fast Dry Thinner to achieve desired viscosity. Mixing colors should be used without thinning. Retard with T-22.

WASHUP: Use GLL-1840,

FLOW AGENT: Opaque SS Lacquer colors do not normally require a flow additive. Mixing Colors and Clears may require small amounts of CM-9775 Concentrate. Use no more than 2 oz. per Gallon! !Over use of this highly concentrated additive will create bubbling and adversely affect adhesion.

WASHUP: SYS-1925 or biodegradable washes 2500 or 2510 gel.

ALWAYS TEST PRINT BEFORE PRODUCTION!