Emulsion and Haze Removers
Screen Systems Emulsion Remover
This is a liquid which is applied to screens to dissolve the emulsion.
It can be sprayed or brushed onto a dry screen and allowed to set for
5 minutes. Then, a pressure washer should be used to remove any emulsion
residue. Ideal for tank use without heat.
6000 Series
Regular Strength for use right from the bottle.
SYS-6000-32 Emulsion Remover Qt.
SYS-6000-36 Emulsion Remover Gal.
Concentrate - 1 part concentrate to 3 parts water.
SYS-6100-32 Concentrated Remover Qt.
SYS-6100-36 Concentrated Remover Gal.
ULANO #4
A ready to use stencil remover liquid for fast and thorough removal of
direct emulsions. Will not etch fabric and contains no strong alkalis
or hypochlorites. Ideal for tank use.
UL-004-Q Ulano #4 Remover Qt.
UL-004-G Ulano #4 Remover Gal.
400R Emulsion Remover Concentrate
400R is a concentrated liquid, biodegradable reclaiming agent. It's an
economical solution for removing all direct, direct/indirect, and capillary
film emulsions. 400R also incorporates a light degreasing agent to eliminate
further processing steps before recoating.
400R 400R Concentrate Qt.
EMULSION REMOVER POWDER
These SMP crystals are the same as used to make the liquid removers above,
except without the water. Two ounces of powder are used for each gallon.
Available from a 2 ounce size (premeasured for one gallon) to 110 ounce
for a 55 gallon drum. Ships as hazardous.
SYS-6002 2 oz Makes one gallon
SYS-6016 16 oz. Makes 8 gallons
SYS-6040 40 oz. Makes 20 gallons
SYS-6080 80 oz. Makes 40 gallons
SYS-6110 110 oz. Makes 55 gallons
Screen Systems Premium Emulsion Remover
This is a liquid acid based concentrate must be reduced with water before
use. Available in several strengths for your convenience. Reduced remover
is applied to screens to dissolve the emulsion. It can be sprayed or
brushed onto a dry screen and allowed to set for 5 minutes. Then, a pressure
washer should be used to remove any emulsion residue. Ideal for tank
use without heat.
6450 Series 50:1
Mix one gallon in fifty gallons of water.
SYS-6450-32 Emulsion Remover Qt.
SYS-6450-36 Emulsion Remover Gal.
6415 Series 15:1
Mix one gallon in fifteen gallons of water.
SYS-6415-32 Concentrated Remover Qt.
SYS-6415-36 Concentrated Remover Gal
Ulano #5 Stencil Remover Paste
A ready to use stencil remover paste for fast and thorough removal of direct
emulsions. Will not etch fabric and contains no strong alkalis or hypochlorites.
Ideal for tank use.
UL-005-Q #5 Remover Qt.
UL-005-G Ulano #5 Remover Gal.
Haze Remover
5230 Haze Remover Gold
A very potent and works very fast, yet without the strong odor usually
associated with haze removers., Extremely effective for removing even
the most stubborn ghosts from printers' screens. Less harmful to mesh
that corrosive haze removers. For use with all films and emulsions. By Screen Systems.
SYS-5230-Q Haze Remover Qt.
SYS-5230-G Haze Remover Gal.
SYS-5230-5G Haze Remover 5 Gal.
ULANO WALK AWAY HAZE REMOVER
Walk Away Haze Remover is a thick liquid haze remover effective against most ink stains and stencil residues. Walk Away Haze Remover is formultated to react as it dries on the screen, so that it can be left to work for a period of hours, or overnight.
This dwell time with not harm polyester, nylon, or stainless steel fabric, but will damage metalized (nickel-coated) polyester.
UL-WAHR-G 5 Kg Walk Away Haze Remover Liquid
UL-WAHR-Q 1 Kg Walk Away Haze Remover Liquid
ULANO 78
Remove emulsion or ink residue easily with this paste screen reclaiming
agent. Corrosive product that contains caustic soda and can etch fabric.
Ships as hazardous.
UL-078-G 5 Kg #78 Haze Remover Paste
UL-078-Q 1 Kg #78 Haze Remover Paste
