TABLE ADHESIVE & PALETTE PROTECTOR
Pal-A-Tac Spray Adhesive
Pal-A-Tac is a quick-drying, translucent, web spray which provides
temporary adhesion for holding textile fabrics to the printing
pallet. Strong and waterproof, Pal-A-Tac assures accurate
registration and excellent print quality. Printing can
immediately follow the application of Pal-A-Tac, as it
dries instantly on the pallet. After printing, fabrics
strip quickly without staining. Permanent Pal-A-Tac bonds
are obtainable by spraying both surfaces to be bonded.
Surfaces sprayed with Pal-A-Tac may accumulate dust and
lint but it is easily reactivated with water using a lint
free cloth. Pal-A-Tac is safe to use for many materials,
resulting in water-tight bonds. Applications of Pal-A-Tac
to flexible stock permits folding. Available in 12 oz.aerosol
cans, 12 per carton. Use Pal-A-Tac with a wide variety
of materials:
SYS-1865 Web Pal-A-Tack Adhesive
SYS-1866 Mist Pal-A-Tack Adhesive
SYS-1867 High-Temp Pal-A-Tack Adhesive
Safety- Pal Adhesives
Albatross Safety-Pal water-based pallet adhesive provides a long-lasting, pressure-seneitive
tack which will not transfer onto fabrics. Safety-Pal may be flash cured prior
to placing material on pallet. Tack can be reactivated with a mist of water.
Roller applicator makes it easy to apply just the right amount of adhesive
to your pallets.
54-1081-0 Pint
54-1082-1 Gallon
54-1083-5 5 Gallon
TekBond
Tekmar's Tekbond TB-10 is a revolutionary new adhesive, developed specifically for the screen printing industry.
It is manufactured using newly developed synthetic polymer technology, that until now, has not been available for screen printing applications.
TB-10 is designed to be sprayed through an adhesive applicator, but can be hand applied. It affords tremendous hold down for both Tees and sweats
and has a tack time that rivals aerosol solvent based adhesives. Should the adhesive lose it's tackiness as a result of lint or fleece build up,
it can be quickly re-activated by wiping over with a damp sponge, giving maximum use and minimizing reapplication.
TB-10-G Gal $34.00
Tekmar Target Adhesive Applicator TB 500
Tekmar's TARGET SYSTEM TB 500 is the ideal replacement for aerosol adhesives. Perfect for small to medium sied screen print shops,
working with automatic and manual presses. Snapping easily onto a specal 1 gallon bucket, the exceptional economy of the system
eliminates the need for frequent refills. Fully adjustable for both fluid and air flows, the stainless steel tipped spray gun utilizes
HVLP technology, allowing the application of a perfect mist coating of adhesive, while minimizing overspray.
TH-TB500 Target System
PALETTE PROTECTOR
These are rolls of adhesive backed paper that are used to cover
a platten while adhesive is applied to the paper. This makes
for easy removal of excess ink, adhesive, and lint. Available
in 100 yard rolls. Available in a smooth
surface finish.
Smooth Surface
RT-4350-16 16” x 100 yd
RT-4350-18 18” x 100 yd
RT-4350-24 24” x 100 yd
