QT - 550 SERIES H.O. FLUORESCENT RED PF L550FLR Q

Features:

  • Superior Formulation.
  • Excellent opacity with no underbase needed.
  • For Direct Printing or Cold Peel Transfers.
  • Ideal For Hand or Machine Printing.
  • Very Bright Colors

Price: $ 57.35 / QT



Product Overview


Ultra High Opacity When Printing on Dark Colors! Print Directly on Dark Fabric with No White Underbase! Ideal for use with Machine or Hand Screen Printing 550 Series High Opacity Plastisol Inks are available in a range of popular, ultra high opacity colors for direct screen printing. In most cases, 550 Series High Opacity Plastisol Inks can be screen printed directly onto dark fabrics or garments without using a white underbase! 550 Series Inks have excellent washability and a very soft hand feel when screen printed. These inks are extremely opaque and are designed for screen printing on dark fabric. 550 Series High Opacity Inks are corverting to all phthalate free.

Click Here for Color Mixing System

SPECIFICATIONS:

USES: For use on cottons, cotton/polyester blends, can be used on cold peel transfers, and on nylon jackets (with Nylon Bonding Agent).

FINISH: Cures to a soft-hand finish.

OPACITY: Good opacity.

DRYING TIME: 500 Series plastisol inks will not air dry. They must be heat cured. 500 Series inks will fully cure and withstand repeated washings when the entire ink deposit reaches 310°F. Curing can be accomplished with the use of a conveyor dryer, flash curing unit, or simple infrared heater. Will semi-cure or gel at 250°F for transfers.

SCREEN FABRIC: Use 40-305 monofilament polyester depending on the substrate for direct prints, 80-125 mesh for transfers.

SCREEN COATING, FILM, BLOCKOUT: Use water soluble hand-cut, photo screens and blockouts with this ink or use other suitable products.

MODIFIERS: Use small amounts of 502 reducer to achieve the look of a water based print. Any amount of 502 curable reducer can be used to reduce opacity and soften hand.

TRANSFERS: Transfert 75 paper is recommended. For increased durability, use adhesive powder or print 841 or 842 adhesive over the entire transfer. Set transfer press for medium pressure for 10-15 seconds at 350°F. Peel cold.

WASHUP: T-125 mineral spirits, or biodegradable washes SYS-2500, SYS-2550 or SYS-2510 screen wash gel.

ALWAYS TEST PRINT BEFORE PRODUCTION!

QT - 550 SERIES H.O. FLUORESCENT RED PF L550FLR Q

Item ID: L550FLR Q

Manufacturer: QT - 550 SERIES H.O. FLUORESCENT RED PF

Model No:

  • Superior Formulation.
  • Excellent opacity with no underbase needed.
  • For Direct Printing or Cold Peel Transfers.
  • Ideal For Hand or Machine Printing.
  • Very Bright Colors