EACH - CRATING FOR EMULSION REMOVER

Crate

Product Description:

The safest automatic emulsion removal system available. The Screen Systems Automatic Emulsion Remover brings 1000 p.s.i. power to a recirculating system. Using a high powered removing fluid instead of plain water, this system combines the benefits of high pressure and efficient chemistry. A unique priming system allows the use of an electric pump with air powered filtration. The proven fan spray technique provides maximum pressure transfer to the screen.

This is the latest advance in emulsion removal available anywhere. We feel that this is the safest system available for both the worker and the environment. All the operator is required to do is place the screen in the holding easel and push one button. At that point, one of the dual air pumps delivers our Screen Systems approved biodegradable emulsion remover to the 1000 p.s.i. pump, then to the scanning spray head. The fan shaped spray moves across the screen providing maximum surface agitation and pressure. This agitation combined with the power of Screen systems approved emulsion remover completely clean any screen in a about one minute in the 9110-1 (sizes to 27x36").

After emulsion remover runs off of the screen, it flows into the drain in the bottom of the cleaning chamber. There it is picked up by the second pump and powered through a bag filter. This removes particles to one micron in size, effectively removing almost all emulsion to be properly disposed of. The emulsion remover fluid is then returned to the reservoir for reuse. Because the remover fluid is filtered before being returned to the reservoir, there is no sump to clean out.

The cabinet and most components are made of welded polypropylene. This makes them almost indestructible while being light weight.

Controls are all solid state with easy to read LED display. While a standard cycle time is set at the factory, it can be easily changed to meet any job. The system uses 12 volts (standard household current is 115 volts) for controls and a 20 amp line for the pressure pump. A UL approved 12 volt converter is supplied with the system. The automatic washer can not be operated with the top open. Air supplied should not exceed 100 p.s.i. or 20 c.f.m.