The screen holder can be adapted to match frame profile thicknesses between 5-25 mm or 20-40 mm. All the pertinent coating parameters can be smoothly and easily programmed by means of the control panel. This machine provides for one-sided or double-sided simultaneous screen coating. To optimize the coating surface, the frame profile height can be adjusted within a range of 25 and 100 mm via a rotary knob on the control panel. The contact pressure and the trough tipping procedures are controlled by the pneumatic system. Extremely smooth operation of the coating carriage thanks to the use of special sliding guides and a special toothed belt drive unit. Safely reproducible coating results with direct coating wet-on-wet or during subsequent coating. Easy-to-use manual functions.
Coating parameters
Coating speed (.5 - 2.5 in/s)
Number of coatings on squeegee side (0 - 10)
Number of coatings on print side (0 - 10)
Flow time (0 - 10 seconds)
Frame profile height (1" - 4")
Screen Format
Frame width (SB): 27" - 38"
Frame height (SH): 38" - 55"
Frame profile height: 1" - 4"
Frame profile thickness: .2" - 1.5"
Dimensions
Width: SB + 14.5"
Height: SH + 19.5"
Depth: 17"
Connections
Electric:
230V / 50Hz (L+N+PE)
110V / 60 Hz (L+N+PE)
Compressed air: " / 6 bar / 10 bar l/min
Continuous sound pressure level: <70 dB (A)