Holographic Glitter

SPECIFICATIONS:

OPACITY: The opacityof the finished prints are excellent; may be printed on black or dark colored grounds. Will stretch and recover well.

CURING: This ink will cure and withstand repeated washings when the entire ink film reaches 320° F 160° C). Because of the reflective nature of the ink film, and the thickness of the ink film, it may be necessary to slow down the belt speed or increase the temperature to reach a full cure. For transfers, semi-cure or gel for 60 to 90 seconds at 250° F (121° C) is suggested as a starting point.

TRANSFER MACHINE SETTINGS:Transfer to garment using heat transfer machine set at 375° F (191° C) for 15 to 20 seconds with pressure set at 40 p.s.i. Allow print to cool prior to removing transfer paper. A high gloss transfer paper is recommended,

MESH:24-40 10-15 metric)monofilament polyester, stretched to manufacturers tension recommendations.

SCREEN COATING, FILM, BLOCKOUT: Direct and indirect photostencils, or water soluble, knife-cut stencils are suitable.

MODIFIERS: These inks are supplied Ready-for-Use. Always stir well to break down false body and determine actual working viscosity prior to adding reducer.

WASHUP: T-125 or biodegradable washup SYS-2500, SYS-2550 or SYS-2520 screen wash gel.