Kolorcure® Adhesion Promoters are designed to improve product performance on difficult substrates. While Kolorcure screen inks and coatings are supplied "ready to use", substrate conditions sometimes change and the addition of the Adhesion Promoters may be required.
Adhesion Promoter #8210 is a general purpose additive which will improve adhesion when used at 10-20% by weight.
WARNING: The use of goggles, gloves, and protective clothing is recommended. Avoid prolonged breathing of vapors. Contact of liquid material with the skin may be irritating; wash exposed area thoroughly with soap and water. Contact of liquid with the eyes may cause injury - effects may be delayed; flush eyes with large amounts of water for 15 minutes and call a physician. Do not take internally; if ingested, induce vomiting and call a physician. Like most polymers, the properly-cured resins are considered to be largely inert.
Based on our experience, we believe that the above information is accurate, but we offer no guarantee as to the use or application of our products or of this information.
NOTE: Kolorcure additives become an integral part of the cured ink or coating film. The use of excessive amounts of these products may affect cure speed, flexibility, or adhesion. Once the Kolorcure screen ink or coating, has been dilueted, the user should verify that the product still performs to their satisfaction.
ALWAYS TEST PRINT BEFORE PRODUCTION!
